Supreme Pressure Signals for cTrader: a signal when a stretched move stalls
The indicator looks for one event: a burst that runs out of fuel. A bar's high or low travels far beyond a volatility band around its average, the next bar stops expanding, and a LONG or SHORT is marked against the burst, back toward the average, when that bar closes. Around that core it maps pressure clusters at swing points, tracks timed session ranges with their failed breakouts, rates every signal from 0 to 10 with up to four stars, and draws a ticket with an entry, a stop and three targets. It measures how stretched a market is; it does not forecast where it goes next. It reads the chart and alerts you. It never places an order: every trade is yours to take or to skip.
cTrader Desktop · C# on the cAlgo API · 191 settings in 12 groups · AccessRights = None · sold on the cTrader Store, no trial
The defaults, and every one of them can be changed in the settings. A signal is decided when its bar closes and does not change afterwards. The score describes the setup; it is not a chance of success. The entry, stop and target lines are planning references, not orders.
What it looks like on the chart
Pictures from the cTrader Store gallery, each with what it shows, and below them three whole charts. Select any picture to open it full size.













What it draws
- LONG and SHORT labels on the signal bars. The first line carries the side, the burst's stack height (for example 3/6) and two tags: PRESSURE when the burst reached a cluster, RANGE when it went beyond the session range. The second line carries the stars, the score out of 10 and its name. Hover a label to read what went into it.
- Pressure clusters: bubbles at swing highs and lows, sized by their weight, with a score from 1 to 10 inside and a level line out to the newest bars. Resistance clusters sit above price at swing highs, support clusters below it at swing lows.
- Session ranges: a box for each opening range, with Pressure Cap, Pressure Floor and Equilibrium lines that carry the window's name, and a cross where a breakout fails back inside. Optional diamonds mark a sweep that was reclaimed.
- The ticket: a stop zone and three target zones, with lines and priced labels, and a result label when the trade ends: TP3 with its R, SL, or TIME.
- A dashboard in any of six positions, described further down.
- Seven colour themes and an optional tint on extreme bursts.
How it decides
The band. A 20-bar EMA of the close, with a band 2 ATR(14) on each side of it. A bar bursts when its high pokes above the upper band or its low below the lower one.
The burst stack. The distance beyond the band, measured in ATR, builds a stack: level 1 at the band, one more level for every half ATR beyond it, up to level 6. The stack says how far the market has stretched past its own normal range, on its own volatility.
The stall. A burst has peaked when the next bar reaches less far beyond the band than the one before it. The indicator does not signal while a burst is still growing: if the peak reached level 3 or higher, it signals when the stalling bar closes, against the burst - SHORT after an up burst, LONG after a down burst. With the default bar-close setting, a signal does not change after it prints.
The spacing. A new signal needs no open ticket and at least 20 bars since the last signal. Optional filters can ask for more: a minimum distance beyond the band, a rejection wick, RSI exhaustion, a burst that reached an opposing cluster, a burst beyond the session range, a bar inside a trading session you switched on, a minimum star rank, or one direction only. All of them are off by default.
The score. Every signal is rated from 0 to 10 from nine pillars, each with a weight you can change: burst extension, stack height, momentum exhaustion, rejection wick, trend fit, volatility regime, reversion room, pressure cluster and session range. One star starts at 4.5, two at 5.5, three at 6.5 and four at 7.5. The score describes the setup in front of you. It is not a forecast and not a chance of success.
The pressure clusters. Every swing high and low with 12 bars on its left and 4 on its right can start a cluster, weighted by the volume and the size of the bars around it. Price reaching into a cluster's band is a touch. Going through it by a minimum depth is a sweep. Closing back on the cluster's side within six bars is a reclaim. Staying beyond it is a break, and the cluster then flips to the other side. A cluster's score combines its weight, how well it has held and how recently it was tested. Clusters are built over the last 3,000 bars when the indicator loads.
The session ranges. Two windows are on by default, New York and London, and an Asia window is ready to switch on. Each has a range time, a session time and a name, in the timezone you choose. During the range time the indicator records the high and the low. After it, the first close beyond the range in that session is a breakout, and a close back inside after it is a failed breakout, marked with a cross. The module switches itself off on daily charts and above.
The ticket. The entry is the close of the signal bar. The stop sits beyond the burst's extreme with a 0.3 ATR buffer, kept between 0.5 and 3 ATR; a fixed ATR multiple or the swing extreme are the other two choices. By default the three targets snap to the nearest opposing clusters at least 0.6 R away, and a rung with no cluster falls back to its R multiple. Plain R multiples and a move back to the average are the other two choices. These levels are planning references, not orders.
How a ticket ends. Reaching the third target ends it. Touching the stop before any target ends it at -1 R. Touching the stop after a target was reached ends it at that target's R. A stop bar that also touches a target counts as a full stop. A ticket still open after 200 bars ends at that bar's close, as a time stop. Only one ticket is open at a time.
The dashboard
Written on the newest bar, top right by default, in three text sizes, and every section can be switched off on its own. Status (scanning, bursting, armed or in a trade), the burst now and the last signal with its score. The nearest resistance and support clusters, the last cluster event and running counts of sweeps, reclaims and breaks. The session range with its cap and floor and where price stands against it. Nine live quality sliders, one per pillar, with the score the current bar would get. A burst bias on three timeframes. The newest exits with their R.
One section counts what the tickets drawn on your chart met. Those counts describe the bars your chart has loaded, take no account of spread, slippage or commission, are not a backtest and are not a chance of success. They also change with the history setting, so they are a description of one chart, not a verdict on the indicator.
What the testing showed
We tested it on 2026 bars of forex, gold, silver, crypto, indices and oil: for every signal, random entries in the same market and direction with the same stop distance and the same three targets. The rules were fixed before any result was read, and the newest months were kept back and read once.
On those bars the signals did not reach the first target more often than the random entries, and neither the star filter nor the cluster targets changed that. So a signal is a read of a stretched market, not a forecast: what it gives you is the burst measured, the stall flagged, the clusters and the ranges mapped, the plan already drawn and the alert. The decision stays yours.
Alerts and the webhook
Nineteen conditions, each with its own switch: Long, Short, Any Signal, Long + Cluster, Short + Cluster, TP3 Hit, Partial TP Exit, SL Hit, Time Stop Exit, Extreme Up Burst, Extreme Down Burst, Cluster Sweep, Bullish Cluster Reclaim, Bearish Cluster Reclaim, Cluster Break, Near Strong Cluster, Session Range Set, Range Breakout and Failed Range Breakout. Long and Short are on by default. Each can arrive as a pop-up, a log line, a sound of your choice and e-mail, and a test on start checks your settings without waiting for a signal. One setting chooses once per bar, once per bar close, only once or once per minute. Signals and the time stop alert when the bar closes; stops, targets and cluster events alert on the touch. Nothing fires while the indicator walks the chart's history, and nothing fires in a backtest.
A webhook posts the same nineteen to any address you enter: a chat bot, a journal, an automation flow or your own server. Choose JSON with the trade's fields (side, entry, stop, the three targets, the exit and its R, the score and the stars), plain text, or your own template with 29 placeholders. Add an access key header and one more header of your own. A post that gets no success answer is sent again, and a test on start checks the address. It stays off until you enter one, is capped at twenty messages a minute, and a failure is logged rather than thrown. It sends through cTrader's own networking service, which is why the indicator needs no file or network access rights at all.
Two ready-made templates. Set Payload Format to CustomTemplate and Content Type to ApplicationJson, then paste one into Custom Template.
Discord. Webhook Address: your channel's webhook URL (Integrations, Webhooks). Custom Template:
{"content":"**{{title}}** {{ticker}} {{interval}} @ {{close}} | {{stars}} stars | entry {{entry}} stop {{sl}} | TP {{tp1}} / {{tp2}} / {{tp3}}"}
Telegram. Webhook Address: https://api.telegram.org/botTOKEN/sendMessage, with your own bot token in place of TOKEN. Custom Template:
{"chat_id":"YOUR_CHAT_ID","text":"{{message}} | {{ticker}} {{interval}} | entry {{entry}} stop {{sl}} | TP {{tp1}} / {{tp2}} / {{tp3}}"}
What it cannot see
Cluster weights read your broker's tick volume, and everything reads your broker's candles, so another feed can draw differently. A symbol with no volume still runs: its clusters simply carry equal weight. Clusters exist only inside the 3,000-bar window, so on a deep chart the older tickets were drawn without clusters and their targets fall back to R multiples; set the cluster lookback to 0 to build clusters over the whole chart. The ticket state depends on where the history starts, so a different history setting can change the earliest signals. On the bar that is still forming, the dashboard moves with every tick and a touch can change until the bar closes.
It is a charting and analysis tool: it reads the chart and it alerts. It does not place orders and it has no access to your account, so every order is placed by you, or not at all.
Requirements
cTrader Desktop. An indicator on the main price chart: it draws nothing in a pane of its own. Any timeframe from one minute up, and any instrument: forex pairs, metals, indices and crypto. The band, the stack, the stop and the clusters are all sized by the symbol's own ATR, so the same settings fit each market. Session ranges need an intraday chart.
It declares no access rights at all - AccessRights = None - so it cannot read files, start processes or open connections of its own. 191 settings in twelve groups: eight come first (the burst engine, pressure clusters, session ranges, the signal filter, trade levels, strength ranking, the dashboard and the visuals), and four more belong to cTrader (display, alerts, the webhook and diagnostics).
Bars To Calculate sets how much history it works through, 20,000 bars by default. When it attaches, the indicator loads the history it needs, up to that setting, and works through every bar before it draws. The first attach to a symbol and timeframe can take about a minute, because cTrader restarts the indicator as the history arrives; keep the chart open. A smaller Bars To Calculate makes it faster.
Support
Through the Discussion tab of the Store listing, so the conversation stays next to the product. Please include your broker, symbol, timeframe, cTrader version and a picture of the full chart, and you will get a useful answer first time.
This is analytical software, not investment advice. It reads the chart and alerts; it never places, modifies or closes an order, and it is built with no access rights at all. The score describes a setup and is not a chance of success. The entry, stop and target lines are planning references on a chart, not orders: the trader places every order. Trading involves risk. Past performance does not guarantee future results.